Recognition Systems HandPunch 3000 Installation, Operations And User's Manual page 9

HandPunch 3000/4000 Operations and User's manual
Employee enrollment
Important! To enter the command
mode, you must press CLEAR and
ENTER, at the same time, enter
your ID and place your hand to
enter the command mode. When
the display shows ENTER
PASSWORD, enter the enrollment
password (4 is default) and #.
Example, Enroll user 321
Show the employee the hand
placement techniques used in
the FIRST ENROLLMENT.
The hand reader may ask for
another hand placement.
If the LCD displays "SORRY
CAN'T ADD, another employee is
likely enrolled with the same
number. Also, check for improper
hand placement or insufficient
memory in the LIST USERS menu.
Press # to enroll another employee
or 5 to exit menu
8
ENTER ID
(TIME) (DATE)
ENTER PASSWORD
ADD EMPLOYEE
* NO YES #
ENTER ID
PLACE HAND
1/3
REMOVE HAND
PLACE HAND
2/3
REMOVE HAND
PLACE HAND
3/3
321
USER ENROLLED
ADD EMPLOYEE
* NO YES #
CLEAR + ENTER
ID
4 #
#
3 2 1 #
# add another
* next menu
5 to exit