List User Information - Recognition Systems HandPunch 3000 Installation, Operations And User's Manual

HandPunch 3000/4000 Operations and User's manual

List User Information.

This menu allows you to display or print a users' ID number, individual reject threshold
level, and time restrictions.
List users
The LIST USERS function allows
you to view or print user
information:
ID number
Authority level (0 and 5)
There are two authority levels:
0 = Employees
5 = Supervisors
User Reject threshold (sensitivity)
Set user data
Changing A Users Reject Threshold
The reject threshold determines the sensitivity of hand geometry comparison. If the
threshold is too low, a person may find it difficult to achieve a successful hand read. If it is
too high, system security may be compromised. If an individual is having a problem, their
threshold can be set to a higher value (say 160) without compromising the security of the
system.
Supervisors can change an employee's reject threshold by entering Command Mode
Management Group (Level 3) and choosing the SET USER DATA option.
Changing an employee's or supervisor's time zone.
Time Zones are used to limit the hours during which an employee may operate the
HandPunch. If the employee attempts to clock in or out outside of the time permitted by the
assigned Time Zone, the HandPunch display will show the message: TIME RESTRICTION.
ENTER ID
(TIME) (DATE)
ENTER PASSWORD
LIST USERS
* NO YES #
USER SPACE XXX
(ID) (REJ) (AUTH)
MORE (#Y/*N)?
DONE. PRESS KEY
LIST USERS
* NO YES #
CLEAR + ENTER
ID
3 #
#
#
# to next ID
* to stop
#
# repeat
* next menu
5 exit
17