Recognition Systems HandPunch 3000 Installation, Operations And User's Manual page 7

HandPunch 3000/4000 Operations and User's manual
First supervisor enrollment
Example:
Enroll with ID number 123.
During enrollment, the display
will ask for at least three hand
placements. To place the hand
properly, rest the four fingers of
the right hand on the front of the
platen. Keeping the hand flat,
slide it forward until the tall pin
between the index and middle
fingers stops further movement.
Squeeze the fingers against the
finger pins and watch the light
display and hand diagram on the
top panel. The lights go out
when you have placed your
fingers properly. If a light
remains on, it a finger is not in
contact with the its finger pin.
The first person enrolled is the
only person who has access to
the command menus until others
are enrolled
Important! After closing the
enrollment menu, you must press
CLEAR and ENTER, enter
your ID number, place your
hand and verify identity
to enter the command mode.
6
ENTER ID
(TIME) (DATE)
ENTER PASSWORD
ADD EMPLOYEE
*NO YES #
ADD SUPERVISOR
* NO YES #
ENTER ID
PLACE HAND
1/3
REMOVE HAND
PLACE HAND
2/3
REMOVE HAND
PLACE HAND
3/3
123
USER ENROLLED
ADD SUPERVISOR
* NO YES #
CLEAR + ENTER
4 #
*
#
1 2 3 #
# add another
5 exit