Engine; Flushing Device; Install Cowling - Yamaha F80B Owner's Manual

Operation
3. Upper level mark
EMU27153

Engine

Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
Check for engine oil leaks.
●
EMU36493

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fitting
on the bottom cowling. NOTICE: If the gar-
den hose connector is not properly con-
nected, cooling water can leak out and the
engine can overheat during operation.
[ECM01801]
1
1. Fitting
2. Flushing device
EMU36963

Install cowling

1. Be sure that all cowling lock levers are re-
leased.
2. Be sure that the rubber seal is seated all
the way around the top cowling.
3. Place the top cowling on bottom cowling.
4. Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
5. Move the levers to lock the cowling as
shown. NOTICE: If the top cowling is
not installed correctly, water spray un-
46
2
ZMU06166
der the top cowling can damage the
engine, or the top cowling can blow off
at high speeds.
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
[ECM01991]
ZMU06131
ZMU06132