Before Calling After-Sales Service - Bush BUCL6082 Instruction Manual

Product support
Help is always at hand

Before Calling After-Sales Service

If you are experiencing a problem with your
refrigerator, please check the following before
contacing the after-sales service.
Your refrigerator does not operate
Check if:
• Your fridge is plugged in and switched on
• The fuse has blown
• Is the temperature adjustment right?
• The socket is faulty. To check this, plug
another working appliance into the same
socket.
Your refrigerator is performing poorly
Check if:
• The appliance is overloaded
• The door is closed properly
• There is any dust on the condenser
• There is an adequate distance between the
appliance and surrounding walls
Your refrigerator is operating noisily
The following noises can be heard during normal
operation of the appliance.
Cracking (ice cracking) noise occurs:
• When the appliance is cooled or warmed
(due to expansion of appliance material).
Clicking noise occurs: When the thermostat
switches the compressor on/off.
Motor noise: Indicates the compressor is
operating normally. The compressor may
cause more noise for a short time when it is first
activated.
Bubbling noise and splashing occurs: Due to
the flow of the refrigerant in the tubes of the
system.
There is a build-up of humidity inside the fridge
Check if:
• All food is packed properly. Containers must
be dry before being placed in the fridge.
• The refrigerator door is opened frequently.
Humidity of the room will enter the
refrigerator each time the door is opened.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Product support
Humidity increases faster if the door is
opened frequently, especially if the humidity
of the room is high.
The door is not opening or closing properly
Check if:
• There is food or packaging preventing the
door from closing
• The door compartments, shelves and drawers
are placed properly
• The door gaskets are broken or torn
The edges of the fridge in contact with the door
joint are warm
Especially during summer (warm weather),
the surfaces in contact with the door joint
may become warmer during operation of the
compressor. This is normal.
Important Notes:
• Unplug your appliance during a power cut
to prevent damage to the compressor.
Once power is restored, delay plugging in
your appliance for 5 to 10 minutes. This will
help prevent damage to the appliance's
components.
• If the appliance will not be used for a long
period of time (such as during holidays),
disconnect the plug. Defrost and clean the
refrigerator, leaving the door open to prevent
the formation of mildew and odour.
• If the problem persists after you have followed
all the instructions above, please consult the
nearest Authorised Service Centre.
• This appliance is designed for domestic use
and for the stated purposes only. It is not
suitable for commercial or common use. If
the consumer uses the appliance in a way
that does not comply with these instructions,
we emphasise that the manufacturer and the
dealer will not be responsible for any repair or
failure within the guarantee period.
25