Before Calling Your After Sales Service; Tips For Saving Energy - Bush BUCL6082 Installation & User's Instructions

Built in larder
Hide thumbs Also See for BUCL6082:
Table of Contents

Advertisement

BEFORE CALLING YOUR AFTER SALES SERVICE

If your appliance is not working correctly, before
calling the service helpline check the following:
What to do if your refrigerator does
not operate ;
Check that ;
• Is there power to the appliance?
• Check your fuse box to see if it has tripped out.
• The thermostat setting is on « • » position ,
• Check the power socket is working by plugging
in another appliance.
What to do if your refrigerator performs
poorly ;
Check that ;
• You have not overloaded the appliance ,
• The doors are closed correctly ,
• There is no dust on the condenser ,
If there is noise ;
The cooling gas which circulates in the refrigerator
circuit may make a slight noise(bubbling sound)
even when the compressor is not running. Do
not worry this is quite normal. If these sounds
are different check that ;
• The appliance is well level
• Are the shelves or the plates on the shelves of
your appliance vibrating? If so rearrange the
shelves accordingly.
If there is water in the lower part of
the refrigerator ;
Check that ;
The drain hole for defrost water is not
clogged(Use defrost drain plug to clean the
drain hole)
Recommendations
• In order to increase space and improve the
efficiency, the « cooling section » of this
appliance is positioned inside the back wall
of the refrigerator compartment. When the
appliance is running, this wall is covered with
frost or water drops. Do not worry. This is quite
normal. The appliance should be defrosted
only if an excessively thick layer forms on the
wall.
20
Customer Helpline: 0345 257 7271
• If the appliance is not used for a long time (for
example during the summer holidays)defrost
and clean the refrigerator leaving the door
open to odours developing.

Tips for saving energy

1– Install the appliance in a cool, well ventilated
room, but not in direct sunlight or near heat
sources (radiators, cooker, etc....).
2– Allow warm food and drinks to cool down
before placing in the appliance.
3– When placing liquids in the appliance they
must be covered.
4– When placing food and drinks, open the
appliance door as briefly as possible.
5– Door seals should be kept clean and
undamaged.

Advertisement

Table of Contents
loading

Table of Contents