Troubleshooting - SAPIRHOME SP-1310-C-4 Instruction Manual

2. Cooling down quickly. When you need to
cool down quickly, put the cooker on a level
place and shower the cooker with cold water
slowly till the safety valve falls down (refer
to the picture, opening the lid is the same as
above).
Caution: Avoid water flowing into the
cooker through the open-preventing valve
and the pressure-limiting valve.
• Don't open the lid if the indicator doesn't fall
down.
• After finishing cooking, please use gloves to
open the lid to avoiding burning.
• Don't open the lid till the safety valve is not
fully down.
VI. Trouble shooting
If any abnormal phenomenon been found, you shall turn off the fire immediately and take the
cooker to a level place and shower the cooker with water slowly to reduce the temperature
and the pressure. Find the reason and solve the problem with the table below.
Problem
Steam comes out from the
underside of the lid.
Steam and liquid leaks from the
safety valve suddenly.
Reason
1. Sealing ring is dirty.
2. Sealing ring is too old.
1. The steam-releasing
hole was obstructed.
The safety function of
the locking pin
working. The release
hole
pressure-limiting valve
is blocked.
_English_
Solution
1. Clean the sealing ring,
cooker mouth and lid.
2. Change the sealing ring.
1. Take the cooker away from
the fire and dredge the
release hole. After it is cool,
is take down
pressure-limiting
of and clean the hole of
pressure-limiting valve.
the
valve