Table of Contents
Advertisement
System
Mode - Standard
Picture
Input
Color
Auto Source
DP Format
Audio
Performance
Wide Mode
OSD
PIP/PBP
Hot Key Assignment
System
DDC/CI
HDMI Black Level
Move
Enter
Quick Start Mode
Mode - Standard
Picture
Quick Start Mode
Color
Power-off
USB charge
Audio
Performance
OSD
System
Move
Enter
Quick Start Mode
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to control functions.
4.
Input: Select the source from HDMI1, HDMI2, Mini DP, DP.
5.
Auto Source: The default is "On", which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
6.
DP Format: Default is DP1.4, can selection support DP1.1 or DP1.2 or DP1.4 format.
7.
Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full and 1:1.
8.
PIP/PBP: Select to set PIP/PBP.
9.
Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume,
Brightness, Gamma, Contrast, Blue Light, Over Drive).
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
HDMI1
On
DP1.2
Full
X
On
Normal
Off
Off
X
Advertisement
Table of Contents
