Table of Contents
Advertisement
Selecting the input
Open the Input control and select HDMI1, HDMI2, Mini DP ,DP or Auto Source. When you
are done, press the joystick to exit current page and store.
Input
Input
HDMI
Auto Source
On
Move
OK
Main menu
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
3.
Toggle the joystick
Information Hot Key
Modes Hot Key
Exit Hot Key
: To exit current page and store.
X
Picture
Mode - Standard
Picture
Brightness
Color
Contrast
Black Boost
Audio
Blue Light
Performance
ACM
OSD
System
HDR
Super Sharpness
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select Picture from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Blue
Light, ACM,Super Sharpness.
5.
Brightness: Adjust the brightness from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Adjusts the balance between light and dark shades.
Exit
to the up
or down
or right
to the left
: Show Monitor Information and Reset control function.
: To change Modes Hot Key menu.
65
50
5
Off
Off
Off
to select Picture from the OSD. The
to adjust the sliding scales.
X
Advertisement
Table of Contents
