Table of Contents
Advertisement
ASC (Auto Sound Calibration) SETUP
1.
Plug the ASC microphone into the ASC input jack.
2.
Place the ASC microphone at the listening position.
3.
Press
ASC button.
•
To create the optimal 5.1 channel sound field, the
selections are in the following sequence:
L ➞ C ➞ r ➞ Sr ➞ SL ➞ SW
4.
When the message "REMOVE MIC" appears in the
display, unplug the ASC microphone.
M
`
Setting the ASC function takes about 3 minutes.
To cancel the ASC (Auto Sound Calibration) setup, press the ASC
button.
The test tone output stops, "CANCEL ASC" appears in the display .
To listen in the ASC (Auto Sound Calibration) mode, briefly press
ASC button.
The selection alternates between ASC ON and ASC OFF in the display.
If you select "ASC ON", you will hear sound in the ASC mode.
If you select "ASC OFF", you will hear sound in the mode set in the audio setup.
58
Advertisement
Table of Contents
