Table of Contents
Advertisement
Speaker Components
(L) (R)
(L) (R)
FRONT
REAR
Front/rear Tallboy Stand
How to Install the Speaker on the Stand
1.
Turn the
STAND upside-down and connect
it to the STAND BASE.
2.
Insert five small
SCrEWS into the five holes
marked with arrows using a screwdriver as
shown in the illustration.
3.
Connect upper SPEAKER to the assembled
STAND.
4.
Insert another large
SCrEW into the hole on
the rear of the speaker marked with arrow
using a screwdriver.
Connecting the Front, Center,Rear and Subwoofer Speakers
1.
Press down the terminal tab on the back of the speaker.
2.
Insert the black wire into the black terminal (–) and the red
wire into the red terminal(+), and then release the tab.
3.
Connect the other end of the speaker cable to the
connecting jacks on the back of the Home Theater .
Make sure the colors of the connecting plugs match the connecting jacks.
•
CENTER
SPEAKER CABLE
STAND
1
3
SCREW (Small): 20EA
SCREW (Large): 4EA
SUBWOOFER
STAND BASE
2
STAND BASE
STAND
4
Black Red
17
Advertisement
Table of Contents
