Servicing - AEG FAVORIT 403 Operating Instructions Manual

Servicing

Before calling our Service Centre, please check whether you can rectify the
fault yourself by following the instructions given below. Should this
information be of no assistance to you in a specific case, please contact our
Service Centre.
The machine will not start
The door has not been properly closed.
The plug is not properly inserted in the power socket.
Check the plug fuse.
There is no current at the socket.
The dishwasher does not fill with water
Ensure the water tap is open.
Ensure the mains water supply has not been cut off.
The inlet hose may be squashed or bent.
Reposition correctly the inlet hose.
The filter of the inlet hose may be clogged.
Clean the filter at the end of the inlet hose.
The filters are blocked
Clean the filters (refer to "Maintenance and cleaning").
The spray arms are not rotating
Ensure the crockery is loaded correctly.
The machine is noisy
Dishes are rattling against each other, (refer to "Loading your machine").
The spray arms are knocking against the dishes.
24