Sanyo FWBP507FF Owner's Manual page 45

Problem
A music/photo file does not play.
No return to start-up screen when
disc is removed.
in the upper left hand corner of
the TV screen.
Buttons do not work or the unit
stops responding.
The unit does not respond to
some operating commands during
playback.
The unit cannot read Blu-ray Disc™
/ DVD / CD disc.
Scene shooting angle does not
switch.
Playback does not start when a title
is selected.
Cannot play back AVCHD file.
The capacity of the USB memory
stick decreased.
Cannot play back a MPEG-2 video
and audio from the USB memory
stick.
Cannot read the contents on the
USB memory stick.
Cannot play back BD-Video.
Cannot use BD-Live.
Repeat setting does not work with a
Blu-ray Disc™
Cannot play back 3D.
Cannot load a Blu-ray Disc™ (that is
stuck in loading mode) and cannot
open the disc tray to eject the disc.
EN
Confirm that the file type is supported.
Refer to page 17 for the compatible file extensions.
The file may be corrupted.
Check to see if it is playable on a PC or other devices.
Soft Reset this unit by turning it off for 30 seconds, then on again.
To completely Reset the unit, press and hold [
panel for 10 seconds to shut down the unit or unplug the AC power cord
from the AC outlet for 5-10 seconds.
The operation is not possible.
To soft reset the unit, press and hold [
seconds to shut down the unit or to hard reset the unit by unplugging the
AC power cord from the AC outlet for 5-10 seconds.
The operations may be prohibited by the disc. Refer to the instructions for
the disc.
Condensation? (Let the unit sit and dry for 1 or 2 hours)
Check to see if the disc is compatible with this unit. (Refer to page 16.)
Wipe dirt off the disc from the center to the outside or replace the disc.
Refer to "Cleaning discs" on page 48.
Angles cannot be switched for Blu-ray Disc™ / DVD which do not contain
multiple Angles. In some cases multiple angles are only recorded for
specific scenes.
Check the settings in "Parental Control" menu.
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or
*.m2t) written to a DVD. The DVD containing AVCHD files must have a
proper file and folder structure meeting AVCHD format specifications.
Please use AVCHD compliant Device / software to burn or copy AVCHD
files to DVD. (Please refer to User Manuals of the device / software for
more information.)
Data may be written on the USB memory stick when a BD-Video uses the
Virtual Package feature while a USB memory stick is connected to the unit.
MPEG-2 is not compatible with this unit.
The USB memory stick is not compatible with this unit or the contents
may be damaged.
Turn off the unit, then turn it back on.
To soft reset the unit, press and hold [
10 seconds to shut down unit to standby mode or to hard reset the unit by
unplugging the AC power cord from the AC outlet for 5-10 seconds.
Connect a USB memory stick (256MB or more of available memory) which
is formatted on this unit. Some discs require memory when playing back
the content.
Do not disconnect the USB memory stick during playback.
BD-Live function cannot be performed because this unit does not connect
the internet.
Repeat setting may be unavailable with some Blu-ray™ discs.
3D Blu-ray™ discs are not supported by this unit.
Unplug unit from AC outlet for 5-10 seconds. Plug unit back in and press
the [ (OPEN/CLOSE)] on the unit to eject the disc.
45
T ip
(POWER)] on the front
y
(POWER)] on the front panel for 10
y
(POWER)] on the front panel for
y
continued on next page