Download Print this page

Pentair AquaTRAM 360 Installation And User Manual page 2

Access lift transport cart

Advertisement

OPERATING INSTRUCTIONS:
1. WARNING- TO REDUCE RISK OF
INJURY, DO NOT PERMIT CHILDREN
TO USE THIS PRODUCT.
2. WARNING- DO NOT PERMIT CHILDREN
TO PLAY ON THIS PRODUCT.
NOTE: BEFORE USING THE CART FOR THE
FIRST TIME READ THIS SECTION COMPLETELY
AND FAMILIARIZE YOURSELF WITH THE
FEATURES OF THE TRANSPORT CART.
STEP 1: Before using the transport cart first
remove the 1/2" bolt in the fixing anchor using a
3/4" wrench. Also, the AquaTRAM
should be all the way up. The cart should be lined
up from behind the lift so that the fork can engage
with the mast (see diagram). Also the cart should be
fully lowered. To lower the cart, turn the control
knob counterclockwise. Then turn the knob back
clockwise to be ready to lift.
STEP 2: Line the cart up centered on the mast and
slide the cart forks under the lift until the fork
captures the mast. Continue sliding until the fork is
fully engaged and the cart stops.
STEP 3: Locate the strap and attach it to the eye-
bolts (either side of the fork assembly) with the s-
hooks. Tighten the strap around the mast to keep the
lift from falling over during lifting and transport.
Make the strap just snug to start with so that the
post of the lift doesn't bind in the anchor.
Adjustment may be required to allow the post to
slide out of the anchor.
STEP 4: Pump the foot pedal to raise the lift out of
the anchor. If nothing happens make sure the
control knob is turned clockwise. If the post binds
in the anchor gently shake the handle to free it up. If
this doesn't work try tightening or loosening the
strap. Raise the lift only enough to clear the
deck/anchor by an inch or two, Don't let the fork hit
the battery. The lift is ready for transport
IF THE LIFT IS STUCK (WON"T MOVE)
DON'T PUMP THE FOOT PEDAL. THIS MAY
CAUSE DAMAGE TO THE LIFT OR THE
CART. MISUSE OF THE CART MAY VOID
YOUR WARRANTY.
®
360 Pool Lift
1

Advertisement

loading