Back Panel - Cameo LED MINI PAR CAN User Manual

1
POWER IN
100V - 250V AC / 50Hz - 60Hz
1
POWER IN
Permanently attached 1 m power cord with Schuko plug.
2
FUSE (FUSE HOLDER)
IMPORTANT INFORMATION: Replace the fuse only with a fuse of the same type and rating. If the fuse blows
repeatedly, please contact an authorised service centre.
3
DMX IN
3-pole XLR input socket for connection of a DMX controller (e.g., DMX mixer).
4
DMX OUT
3-pole XLR output socket for looping through the DMX control signal.
5
LED DISPLAY
Display of the operating modes and additional system settings.
6
CONTROL BUTTONS
4 easily accessible control buttons let you configure the system.
5
ENTER
6
3

BACK PANEL:

2
FUSE
F2A / 250V
4
7