H/W Monitor - ASROCK D2123D4I4 User Manual

D2123D4I4

3.3.9 H/W Monitor

In this section, it allows you to monitor the status of the hardware on your system, includ-
ing the parameters of the CPU temperature, motherboard temperature, CPU fan speed,
chassis fan speed, and the critical voltage.
Fan Control
If [Auto] is selected, the fan speed will controlled by BMC.
If [Manual] is selected, configure the items below.
CPU1_FAN1
This allows you to set the CPU fan1's speed. The default value is [Smart Fan].
REAR_FAN1
This allows you to set the rear fan 1's speed. The default value is [Smart Fan].
FRNT_FAN1
This allows you to set the front fan 1's speed. The default value is [Smart Fan].
Smart Fan Control
This allows you to set the Smart fan's level speed.
Smart Fan Duty Control
Smart Fan Duty x (x means 1 to 11 stage)
This allows you to set duty cycle for each stage.
45