Setting The Date And Time - Canon Xsi Instruction Manual

Setting the Date and Time

3
When you turn on the power for the first time or if the date/time has
been reset, the Date/Time setting screen will appear. Follow steps 3
and 4 to set the date/time. Note that the date/time appended to
recorded images will be based on this Date/Time setting. Be sure
to set the date/time.
The date/time set will start from when you press <0> in step 4.
If you store the camera without the battery or if the camera's battery
becomes exhausted, the date/time might be reset. If this happens, set
the date/time again.
Display the menu.
1
Press the <M> button to display
the menu.
Under the [6] tab, select [Date/
2
Time].
Press the <U> key to select the
[6] tab.
Press the <V> key to select [Date/
Time], then press <0>.
Set the date and time.
3
Press the <U> key to select the
date or time number.
Press <0> so
Press the <V> key to set the number,
then press <0>. (returns to
Exit the menu.
4
Press the <U> key to select [OK],
then press <0>.
The date/time will be set.
Press the <M> button to return
to the shooting settings display.
is displayed.
.)
29