Controls - Frigidaire FPBG2277RF5 Use & Care Manual

CONTROLS

16
Options may vary
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice Increases the production of ice
water filter Press and hold for three seconds to reset after filter
change.
C/F Touch to toggle display from Fahrenheit to Celsius.
default settings Press and hold for three seconds to reset all refrigera-
tor settings such as temp, temp display and tones to
their factory default settings.
Power on-off Press and hold for three seconds to turn off the cooling
system to clean the refrigerator. It also turns off the ice
maker. The temperature displays will read OFF.
Energy Saver Keep this switch set on energy saver (indicator light on)
for lowest energy usage. If moisture appears on the
cabinet between the doors, pressing this button will turn
the indicator light off and enable an electric heater used
to reduce moisture on the cabinet between the doors.
IMPORTANT
Pressing the system on-off icon does not turn off power to your
refrigerator. You must unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the "∧" or "∨" indicator to adjust the temperature to the
desired setting.
The temperature display will begin to blink with the first touch. The
display will time out after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended
period of time, an alarm will sound and the door
ajar indicator will light up. The alarm is turned off
by closing the door. Press the alert reset key to reset
any system alarms.
High Temp In the event of a high temperature condition, the
temperature display will blink and display "HI". After
20 minutes, the alarm will sound and the high temp
indicator will be red. Pressing the alert reset key
will acknowledge the high temp alarm. The highest
temperature reached will be displayed for 5 seconds
and the refrigerator will resume normal operation.
Power Fail In the event of a power failure, the power fail alert
will be displayed and the temperature display will blink
until the alert reset icon is pressed, acknowledging the
alarm. Other modes may be turned off until the alarm
is acknowledged. The power fail alert is turned off and
the refrigerator will resume normal operation. The
high temp alarm may also be illuminated until a safe
operating range temperature has been reached.
FRIGIDAIRE &
FRIGIDAIRE GALLERY