Subscribe to Our Youtube Channel
Related Manuals for aFe Power 77-46401
Summary of Contents for aFe Power 77-46401
- Page 1 ® Logo orientation for graphic purpose only advanced FLOW engineering Instruction Manual P/N: 77-46401 & 77-46402 Make: Volkswagen Model: Jetta TDI Year: 09-11 Engine: L4-2.0L (td) Make: Volkswagen Model: Golf TDI Year: 2011 Engine: L4-2.0L (td)
- Page 2 ® • Please read the entire instruction manual before proceeding. • Ensure all components listed are present. • If you are missing any of the components, call customer support at 951-493-7100. • Ensure you have all necessary tools before proceeding. •...
- Page 3 aFepower.com Page 3...
- Page 4 ® REMOVAL Figure A Refer to Figure A for step 1 Step 1. Remove the engine cover to access the fuel rail. 1 Page 4...
- Page 5 REMOVAL Figure B Refer to Figure B for step 2 Step 2. Disconnect the OE wire harness from the fuel rail. 2 aFepower.com Page 5...
- Page 6 ® INSTALL Figure C Refer to Figure C for steps 3-5 Step 3. Install the supplied wire harness on top of the fuel rail. 3 Step 4. Connect the supplied wire harness to the fuel rail. 4 Step 5. Connect the OE wire harness to the supplied wire harness. 5 * Refer to the wiring diagram on page 11 Page 6...
- Page 7 INSTALL Figure D Refer to Figure D for steps 6-9 Step 6. Remove the two screws securing the air filter cover. 6 Step 7. Assemble Control Module A & Antenna unit D on to bracket E (see inset) . Step 8. Connect the wire harness to the control module. Step 9.
- Page 8 ® INSTALL Figure E Refer to Figure E for step 10 Step 10. Install the module assembly and secure with the screws removed in step 6. 7 Page 8...
- Page 9 INSTALL Figure F Refer to Figure F for steps 11-12 Step 11. Connect the red wires to the positive (red) battery terminal. Step 12. Connect the black wire to the negative (black) battery terminal. * Refer to the wiring diagram on page 11 aFepower.com Page 9...
- Page 10 ® INSTALL Figure G Refer to Figure G for steps 13-15 Step 13. Replace the engine cover. Step 14.Turn the unit on by holding the “on” button on the remote control until the flashing light stops blinking. Step 15. Start the vehicle. Page 10...
-
Page 11: Wiring Diagram
WIRING DIAGRAM TO +12V TO +12V (RED) (RED) TO GROUND TO FUEL PRESSURE (BLACK) SENSOR ANTENNA MODULE UNIT TO VEHICLE ECU aFepower.com Page 11... - Page 12 ® Page left blank intentionally Page 12...
- Page 13 Page left blank intentionally aFepower.com Page 13...
- Page 14 ® aFe Key Chain aFe Power Hat P/N: 40-10103 P/N: 40-10114 S/M P/N: 40-10115 L/XL To purchase any of the items above, view airflow charts, dyno graphs, photos, and video; please go to aFepower.com. Page 14...
-
Page 15: Warranty
Warranty General Terms: • aFe warrants their products to be free from manufacturer’s defects due to workmanship and material. • This warranty applies only to the original purchaser of the product and is non-transferrable. • Proof of purchase of the aFe product is required for all warranty claims. •... - Page 16 ® ® advanced FLOW engineering, inc. 252 Granite Street Corona, CA 92879 TEL: 951.493.7100 • TECH: 951.493.7137 E-Mail:Tech@aFepower.com P/N: 06-80409...
Need help?
Do you have a question about the 77-46401 and is the answer not in the manual?
Questions and answers