Sony DCR-TRV9 Service Manual page 32

NOTE: Follow the disassembly procedure in the numerical order given.
2-1. F PANEL ASSEMBLY
2 FP-654 flexible board
7 Connector
(from CN7003 of MA-322 board)
2-2. CABINET (L), CABINET (R) ASSEMBLIES
7 FP-650 flexible board
2 Screw (M2 × 3)
4 Screw (M2 × 4)
5 Screw (M2 × 4)
SECTION 2
DISASSEMBLY
1 Screw (M2 × 4)
!⁄ Cabinet (Upper)
4 Screw (B2 × 5)
6 Screw (B2 × 5)
0 MA-322 board
9 Screw (B2 × 5)
0 MA-322 board
(from CN7805 of KY-39 board)
3
8 Harness (BT-55)
0 MA-322 board
Claw
5
Front panel assembly
3 Function switch block
(MF-4580)
(from CN7002 of MA-322 board)
1 Screw (M2 × 4)
1 Screw
(M2 × 4)
8 Open the jack cover.
4 Screw (M2 × 4)
1 Screw (M2 × 3)
6 Screw (M2 × 4)
(from CN9831 of LI-64 board)
* Be careful that the harness is fragile and can be easily broken.
In addition, when this harness is removed, the memory backup
power is turned off, and setting of the user's memory
becomes necessary.
2-1
DCR-TRV9/TRV9E