FRÄNKISCHE profi-air flat Series Operating Instructions Manual
Wireless remote control
Hide thumbs
Also See for profi-air flat Series:
Related Manuals for FRÄNKISCHE profi-air flat Series
Summary of Contents for FRÄNKISCHE profi-air flat Series
- Page 1 Operating instructions profi-air® flat / flex wireless remote control Building Technology www.fraenkische.com...
- Page 2 Operating instructions - profi-air flat / flex wireless remote control...
-
Page 3: Table Of Contents
Operating instructions - profi-air flat / flex wireless remote control Table of contents 1 General information 6 User menu 1.1 Introduction 6.1 “Operating modes” display field 1.2 Safety 6.2 “Operating data” display field 1.3 Symbols used 6.3 “Info line” display field 1.4 Intended use 6.4 “Ventilation mode”... -
Page 4: General Information
Operating instructions - profi-air flat / flex wireless remote control 1. General information The wireless remote control has been developed specifically for demanding operators of ventilation units from the profi-air flat/ flex product lines, who emphasise innovative operation. The remote control has a wireless connection to the control board of the ventilation unit. -
Page 5: Intended Use
Operating instructions - profi-air flat / flex wireless remote control 1. General information 1.4 Intended use The wireless remote control must only be used to operate the ventilation units from the profi-air flat / flex product lines, and it is only suited for domestic use inside closed and frost-protected rooms. -
Page 6: Layout Of The Wireless Remote Control
Operating instructions - profi-air flat / flex wireless remote control 2. Layout of the wireless remote control 2.1 Front Display Navigation button 2.2 Back Fastening points Open battery compartment Optional USB connection... -
Page 7: Putting The Wireless Remote Control Into Operation
Operating instructions - profi-air flat / flex wireless remote control 3. Putting the wireless remote control into operation 3.1 Installation of the antenna (profi-air 180 flat only) In order to ensure reliable communication between the ventilation unit and the wireless remote control, the included antenna must be installed in profi-air 180 flat. -
Page 8: Display Overview
Operating instructions - profi-air flat / flex wireless remote control 4. Display overview Operating modes Operating data Info line Time/day Ventilation mode Navigation button The following table provides a short description of the different symbols and buttons of the wireless remote control. The wireless remote control features a power saving function which switches the display off between 11:00 pm and 07:00 am. -
Page 9: Navigation Button And Keystroke Combinations
Operating instructions - profi-air flat / flex wireless remote control 5. Navigation button and keystroke combinations The following table provides a short description of the different symbols and buttons of the wireless remote control. 5.1 Navigation button Button Function Push the “CENTER” button to start the user menu, select a menu item or confirm a setting. Push the “LEFT”... -
Page 10: User Menu
Operating instructions - profi-air flat / flex wireless remote control 6. User menu The user menu is used to control the profi-air 180 flat / profi-air 250 flex / profi-air 360 flex ventilation unit. It allows you to set, e.g., operating modes and visualise operating data, filter replacement, and error codes. The user menu is set up as follows: Set time Automatic... - Page 11 Operating instructions - profi-air flat / flex wireless remote control 6. User menu Symbol Description Holiday mode The holiday mode can be activated for times when the building is not inhabited. The ventilation unit runs with minimum air exchange in holiday mode (i.e., 2/3 of the time in ventilation mode 1 and 1/3 of the time in ventilation mode 0). The function is deactivated by choosing another operating mode or after 28 days at the latest.
-
Page 12: Operating Data" Display Field
Operating instructions - profi-air flat / flex wireless remote control 6. User menu 6.2 “Operating data” display field The “operating data” display field displays different operating data depending on the system's current operating mode and/or the accessories connected. The following table shows and explains the individual items. (T3) (T5) (T1) - Page 13 Operating instructions - profi-air flat / flex wireless remote control 6. User menu Symbol Description Relative humidity (optional accessories required) The drop symbol shows whether the humidity in the building is within the comfort zone. Symbol Relative humidity Description < 24 % very dry air <...
-
Page 14: Info Line" Display Field
Operating instructions - profi-air flat / flex wireless remote control 6. User menu 6.3 “Info line” display field The info line displays error messages, information on different settings of the ventilation unit and the battery status of the wireless remote control. Symbol Description Alarm... -
Page 15: Fitter Menu
Operating instructions - profi-air flat / flex wireless remote control 7. Fitter menu The fitter menu is used to commission the profi-air 180 flat / profi-air 250 flex / profi-air 360 flex ventilation unit. Push and hold the “RIGHT” button for 10 seconds to activate the fitter menu. The unit symbol starts flashing slowly and the control switches to ventilation mode 3. -
Page 16: Sw Menu Item
Operating instructions - profi-air flat / flex wireless remote control 7. Fitter menu 7.1 SW menu item This menu item displays the software versions of the different components in the info line. Display Description H… Software version of the mainboard in the ventilation unit F…... -
Page 17: Defroster Heater Menu Item (Optional Accessories Required)
Operating instructions - profi-air flat / flex wireless remote control 7. Fitter menu 7.4 Defroster heater menu item (optional accessories required) This menu item activates/deactivates the defroster heater: Heat recovery active Symbol for the ventilation unit Summer bypass active Step Description Push and hold the “RIGHT”... -
Page 18: Target Values And Setting Ranges
Operating instructions - profi-air flat / flex wireless remote control 7. Fitter menu Step Description Push and hold the “RIGHT” button for approx. 10 seconds to start the fitter menu. Select the summer bypass menu item by pushing the “RIGHT” button until the summer bypass is displayed as shown above. -
Page 19: Error Codes
Operating instructions - profi-air flat / flex wireless remote control 8. Error codes Code Description Code Description Extract air fan Room air temperature sensor (T5) Supply air fan Humidity sensor Summer bypass flap Fresh air temperature < -13 °C Fresh air temperature sensor (T1) Supply air temperature <... -
Page 20: Weekly Programme P3
Operating instructions - profi-air flat / flex wireless remote control 9. Weekly programmes Weekly programme P3 Monday - Friday Time / mode Weekend Time / mode Weekly programme P4 Monday - Friday Time / mode Weekend Time / mode Weekly programme P5 Monday - Friday Time / mode... -
Page 21: Weekly Programme P6
Operating instructions - profi-air flat / flex wireless remote control 9. Weekly programmes Weekly programme P6 Monday - Friday Time / mode Weekend Time / mode Weekly programme P7 Monday - Friday Time / mode Weekend Time / mode Weekly programme P8 Monday - Friday Time / mode... -
Page 22: Weekly Programme P9
Operating instructions - profi-air flat / flex wireless remote control 9. Weekly programmes Weekly programme P9 Monday - Friday Time / mode Weekend Time / mode Weekly programme P10 Monday - Friday Time / mode Monday - Friday Time / mode Weekly programme P11 Using the profi-air cockpit pro software, you can programme the P11 weekly programme as required. - Page 23 Operating instructions - profi-air flat / flex wireless remote control Notes...
- Page 24 FRÄNKISCHE Rohrwerke Gebr. Kirchner GmbH & Co. KG | Hellinger Str. 1 | 97486 Königsberg / Germany Phone +49 9525 88-2200 | Fax +49 9525 88-92200 | marketing@fraenkische.de | www.fraenkische.com EN.70094/3.02.21 | Subject to change without notice | Cat. no. 5000-1347-00 | 02/2021...
Need help?
Do you have a question about the profi-air flat Series and is the answer not in the manual?
Questions and answers