Land Pride FDR1648 Operator's Manual page 36

Section 7: Features & Benefits Important Safety Information
Section 7: Features & Benefits
Features
3 Cutting widths
Gearbox Horsepower rating
Rear discharge
Deflectors
Clevis type
lower hitch points
Floating 3-point
Roll formed front on deck.
Frame-over-deck design
3/16" (5 mm) Deck thickness
Lower hitch points
adjust in and out
Hard rubber tires
Heavy-duty Gauge wheel
arms
Non-aligned gauge wheels
High Blade Tip Speed
Choices of Blades
Blade overlap
Heavy-duty roller bearings
& 1 3/8" machined spindles
Top greasing spindles
Single B-section Kevlar belt
Vacuum formed
ABS belt guards
Spring loaded adjustable
idler
Top Hitch
5 Year Limited Gearbox
warranty
Driveline hanger
Quick Hitch Compatible
32
FDR1648, FDR1660 & FDR1672 Rear Discharge Grooming Mowers 310-366M
Table of Contents
FDR16 Series Grooming Mowers
48", 60", 72" (102 cm, 152 cm, 183 cm) Able to adapt to various size needs.
15 - 40 horsepower (11.2 - 22.4 kW) to cover a wide array of tractors.
The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a
possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow
around objects.
Built-in to throw material down, as well as forcing thrown objects down.
Allows for easy hook-up by being able to remove pins and back into clevises.
Top and bottom hitch points float up and down which allows the mower to float over uneven
terrain.
3/16" (5 mm) roll formed front deck edging for greater strength and impact resistance.
Frames takes stress out of deck by supporting it.
Heavy deck material to aid in overall strength and longevity. Reinforced spindle mounts.
Accommodates many tractor configurations by adjusting in and out.
Hard rubber tires are sandwiched between the rim halves, bolted in and can't go flat. Roller
bearings allow for a long life.
1/4" (8 mm) Gauge wheel arms increases strength.
Rear wheels don't track behind the front wheels to reduce laying grass over.
For cleaner cutting and better dispersion of clippings
48" (102 cm) = 16,203 fpm (82.3 mps)
60" (152 cm) = 18,195 fpm (92.4 mps)
72" (183 cm) = 18,130 fpm (92.1 mps)
Low, medium, high-lift, or mulching blades are available to match customer needs and
specific applications.
1 1/4" (32cm) blade overlap assures no skipping in tight turns.
Roller bearings for smooth running and quiet operation, 1 3/8" machined spindles for
durability, balanced performance, and accuracy. Cast iron housings for added protection
and durability.
Assures top bearing gets grease. No shields to remove.
Simple one belt design. Kevlar material adds additional strength.
No scratching, no rattling.
Allows for constant and proper tension on belt. Better than adjusting gearbox for belt tension.
Top hitch has two hook-up points which allows greater lifting leverage for smaller tractors.
Shows our confidence in the gearbox integrity. 5 year Parts & Labor with S/N 329841+.
For ease in hookup and storage of driveline. Keeps driveline off ground.
Compatible with Land Pride Quick Hitch for easy attachment and removal increases
productivity. [Except 48" (1.22m)]
Benefits
12/2/21