Table of Contents
Advertisement
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
shielded cables and accessories.
Caution
must be no longer than 3 m (10 ft).
Preparing the Environment
Ensure that the environment in which you are using the PCIe-7820R meets the following
specifications.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)
Operating humidity (IEC 60068-2-56)
Pollution degree
Maximum altitude
Indoor use only.
Note
Refer to the device specifications on
specifications.
Unpacking the Kit
Caution
ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.
1.
Touch the antistatic package to a metal part of the computer chassis.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Caution
Note
2 | ni.com | NI PCIe-7820R Getting Started Guide
To ensure the specified EMC performance, operate this product only with
To ensure the specified EMC performance, the length of all I/O cables
To prevent electrostatic discharge (ESD) from damaging the device,
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
0 °C to 40 °C
10% RH to 90% RH, noncondensing
2
2,000 m
ni.com/manuals
for complete
Advertisement
Table of Contents
