Turbosound Inspire iP2000 Service Support

TURBOSOUND
iNSPIRE and iX Reset
Service Support
TURBOSOUND iNSPIRE and iX factory reset procedure.

Applicable products:

•
iP2000, iP1000, iP500, iP15B, iP12B
•
iX15, iX12
Use this procedure if a customer is locked out of the speaker DSP due to forgetting the password.
1. Press and hold down the encoder knob and the SETUP button while powering on the unit.
2. The display screen should now be fl ashing white and blue.
3. Press the encoder knob twice.
4. You should now see the following screen:
5. Click the 4 buttons:
PROCESS -> SETUP -> EXIT -> ENTER
Confi dential, for internal use only. Not to be reproduced.
985-40000-00697 Rev.A
2016-09-16
page 1 of 2