Lcd Video Light; Self Timer - Canon ZR950 A Instruction Manual

- Recording movies under fluorescent lights:
If the screen starts to flicker, select
[ PROGRAM AE] and set the shutter
speed to 1/100.
- The shutter speed resets to [
when you set the mode switch to
or change the recording program.

LCD Video Light

You can use the LCD video light to
record in completely dark places. For a
brighter picture, we recommend
keeping a distance of about 20 cm -
60 cm (8 in. - 2 ft.) from the subject
and/or using the [
program. When you activate the LCD
video light, rotate the LCD panel to face
the subject and use the viewfinder
instead ( 32).
FUNC.
( 24)
FUNC.
[ LCD LIGHT OFF]
[ LCD LIGHT ON]
Press ( )
• The LCD display turns entirely
white when used as the video light.
Use the viewfinder instead.
• Using the viewfinder, select
[ LCD LIGHT OFF] to turn the
LCD video light off.
AUTO]
NIGHT] recording
( 23)

Self Timer

POINTS TO CHECK
: Set the camcorder to record
pause mode.
FUNC.
( 24)
1
Activate the self timer.
FUNC.
[ MENU]
[ CAMERA SETUP]
[SELF TIMER]
2
FUNC.
Press to close the menu.
• appears.
• Set [SELF TIMER] to [
cancel the self timer.
Start/Stop
3
Press
to start recording.
• The camcorder starts recording
video (
still image (
10-second countdown. The
countdown appears on the screen.
• You can also press
( mode) or
( mode) on the wireless
controller. In that case, the
countdown will be only 2 seconds.
NOTES
Once the countdown has begun, you can
Start/Stop
press again or turn off the
camcorder to cancel the self timer.
( 23)
[ ON]
OFF] to
on the camcorder
mode) or takes a
mode) after a
START/STOP
PHOTO
43