Audio Setup (Audio Mode, Wind Screen, Etc.) - Canon ZR950 A Instruction Manual

[REC MODE]: Select the video recording mode.
• Recording in LP mode extends the available recording time on the tape 1.5 times.
• Depending on the condition of the tape (long usage, imperfections, etc.) you may notice
some video anomalies (blocky video artifacts, banding, etc.) in the playback picture
when playing back recordings made in LP mode. We recommend using the SP mode for
important recordings.
• Audio cannot be dubbed on tapes recorded in LP mode.
• If you make recordings in both SP and LP modes on the same tape, during playback you
may notice some video anomalies in the picture at the point where the recording mode
changes.
• When playing back in this camcorder tapes recorded in LP mode with other devices or
vice versa, you may notice some anomalies in the playback picture or the sound may
stop briefly.
[TV TYPE]: In order to display the picture in full and in the correct aspect ratio, select the
setting according to the type of television to which you will connect the camcorder.
[NORMAL TV]: TV sets with 4:3 aspect ratio.
[WIDE TV]: TV sets with 16:9 aspect ratio.

Audio Setup (Audio Mode, Wind Screen, etc.)

AUDIO SETUP
Menu item
[OUTPUT CH]
[WIND SCREEN]
[12bit AUDIO]
[MIX BALANCE]
[AUDIO MODE]
1
Option available only when the mode switch is set to
[WIND SCREEN]: The camcorder automatically reduces the background sound of wind
when recording outdoors.
• The wind screen cannot be turned off when the mode switch is set to
[MIX BALANCE]: When [12bit AUDIO] is set to [
balance with the joystick.
• The camcorder will retain the audio balance adjustment, however if you turn off the
camcorder, [12bit AUDIO] will be reset to [
Setting options
[ L/R], [ L/L], [
[ AUTO], [ OFF
[ STEREO1], [
[ MIX/FIXED], [ MIX/VAR.]
[ 16bit], [ 12bit]
CAMERA
R/R]
]
STEREO2],
.
MIX/VAR.], adjust (
STEREO1].
PLAY
–
1
–
–
–
.
) the sound
44
–
45
–
44
75