Reviewing The Last Scene Recorded - Canon ZR950 A Instruction Manual

NOTES
• When you wake up the camcorder from
standby mode, the following settings
will be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns
to automatic exposure.
- Zoom position returns to full wide-
angle W.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
( 78). To restore the power if the
camcorder shut off, turn the camcorder
off and then on again.
• The camcorder will be woken up from
standby mode if you open the cassette
compartment cover or change the
position of the
camcorder is in standby mode (standby
lamp is on).
/ switch while the

Reviewing the Last Scene Recorded

1
Set the mode switch to
2
If the joystick guide does not
appear on screen, press (
display it.
3
Push the joystick (
toward and release it.
• The camcorder will play back a few
seconds of the last recording
made and return to record pause
mode.
• You can also hold the joystick
pressed ( ) toward
toward to play back the tape
(reverse or forward respectively) in
order to locate the point where you
want to start recording.
( 23)
EXP
FOCUS
.
) to
) momentarily
or ( )
35