Lcd Video Light; Self Timer - Canon DC310 Instruction Manual

image, but the image quality may be
lower, and the autofocus may not work
well.
- The image may flicker when recording
with fast shutter speeds.
- Recording movies under fluorescent lights:
If the screen starts to flicker, select
[ SHUTTER-PRIO.AE] and set the
shutter speed to 1/100.

LCD Video Light

You can use the LCD video light to
record in completely dark places. For a
brighter picture, we recommend
keeping a distance of about 20 cm -
60 cm (8 in. - 2 ft.) from the subject and/
or using the [ NIGHT] recording
program. When you activate the LCD
video light, rotate the LCD panel to face
the subject and use the viewfinder
instead ( 30).
FUNC.
( 22)
FUNC.
[ LCD LIGHT OFF]
[ LCD LIGHT ON]*
Press
FUNC.
* Using the viewfinder, select [
OFF] instead to turn the LCD video light off.
Closing the LCD panel will also turn the LCD
video light off.
The LCD display turns entirely white
when used as the video light. Use the
viewfinder instead.
40 •
Video

Self Timer

pause mode.
FUNC.
(
1
Activate the self timer.
FUNC.
[
[SELF TIMER]
2
Press
•
• Set [SELF TIMER] to [
3
Press
( 21)
start recording.
The camcorder starts recording video
(
image (
10-second countdown. The
countdown appears on the screen.
Once the countdown has begun, you can
press
LCD LIGHT camcorder to cancel the self timer.
POINTS TO CHECK
: Set the camcorder to record
22)
[ MENU]
CAMERA SETUP]
[
FUNC.
to close the menu.
appears.
cancel the self timer.
Start/Stop
on the camcorder to
mode) or takes a still
mode) after a
NOTES
Start/Stop
again or turn off the
( 21)
ON ]
OFF] to