Table of Contents
Advertisement
Select
Fan Always On
Boot Options
Diagnostics menu
Select
Hard Disk Self Test
Secondary Hard Disk Self Test (select models
only)
Memory Test
To do this
Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Set the following boot options:
●
f9
and
f10
Delay (sec.)―Set the delay for the
of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●
CD-ROM boot―Enable/disable boot from CD-ROM.
●
Floppy boot―Enable/disable boot from diskette.
●
Internal Network Adapter boot―Enable/disable boot from Internal
Network Adapter.
●
Boot Order―Set the boot order for:
◦
USB Floppy
◦
Internal CD/DVD ROM drive
◦
USB CD/DVD ROM drive
◦
Hard drive
◦
USB Diskette on Key
◦
USB Hard drive
◦
Network adapter
To do this
Run a comprehensive self-test on the hard drive.
NOTE:
On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Run a comprehensive self-test on a secondary hard drive.
Run a diagnostic test on the system memory.
f9
and
f10
functions
Setup Utility menus
85
Advertisement
Table of Contents
