Table of Contents
Advertisement
Memory module
Description
4096-MB
2048-MB
1024-MB
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the memory module:
1.
Position the computer upside down with the front toward you.
2.
Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the memory module
compartment cover to the computer.
3.
Lift the front edge of the cover, swing it up and to the left (2), and remove the cover (3). The memory
module compartment cover is included in the Access doors, spare part number 517748-001.
4.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Battery on page
39).
Spare part number
517588-001
506772-001
506771-001
Component replacement procedures
43
Advertisement
Table of Contents
