Table of Contents
Advertisement
10.
If it is necessary to replace the hinge covers, remove the four Phillips PM2.0x3.0 broadhead
screws (1) that secure the covers to the hinges, then remove the hinge covers (2).
11.
If it is necessary to replace the display panel, remove the four Phillips PM2.5×4.0 screws (1) that
secure the display panel to the display enclosure.
12.
Remove the display panel (2). The display panel is available using spare part number 517742-001
(WXGA BrightView display panel).
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
71
Advertisement
Table of Contents
