Motorola PMP 400 Series Supplement To User’s Manual page 25

PMP 400 and PTP 200 Series Canopy User Guide Supplement
Figure 7: Configured Region Code on SM Configuration => General page
Figure 8: Active Region Code on SM Home => General Status page
The AP or BHM always operates under its manually configured Region Code (the one on the
Configuration => General page), and so does not show a Region Code on its Home => General
Status page.
Under normal operations, APs and BHMs operating with DFS (see Table 6) will experience an
additional minute after power-up or reboot before they will register any SMs or BHSs. SMs and
BHSs operating with DFS (see Table 6) will experience an additional minute after they reboot
before they will register to an AP or BHM.
Issue 3, January 2009 Page 25 of 45