Introduction - Toro 54610 Operator's Manual

Hide thumbs Also See for 54610:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Scarifier
Model No. 54610—Serial No. 321000001 and Up

Introduction

This scarifier is intended to be used by residential
homeowners. It is designed primarily to loosen the
soil and to remove moss and weeds from the soil on
well-maintained lawns on residential properties. Using
this product for purposes other than its intended use
could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Model No.
Serial No.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
serious injury or death if you do not follow the
recommended precautions.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Do not tamper with or disable safety devices on the
machine, and check their proper operation regularly.
Do not attempt to adjust or tamper with the engine
speed control; doing so may create an unsafe
operating condition, resulting in personal injury.
Register at www.Toro.com.
Figure 1
1. Model and serial number location
2), which signals a hazard that may cause
Figure 2
Safety-alert symbol
Original Instructions (EN)
Printed in China
All Rights Reserved
Form No. 3442-842 Rev E
Operator's Manual
g340199
g000502
*3442-842*

Advertisement

Table of Contents
loading

Table of Contents