ELAC Navis AB-51 Operating Instructions Manual page 9

AirX² Wireless Pairing
Pairing the Navis Speakers with am AirX wireless transmitter is very simple. Please follow the below steps to
complete the process.
1. Press and hold the Wireless Pair button on the Navis speakers until the LED begins to flash rapidly (Around 2
times per second).
2. Press and hold the Wireless Pair button on the back of the AirX² wireless transmitter until the wireless pair
LED on the Navis Speakers stops flashing and goes off (No LED means the speaker is wirelessly paired.)
3. Repeat with additional speakers/subwoofers (Up to 3 units)
ELAC Navis Speakers | www.elac.com | Page 8
Wireless Pair Button Discovery Connect
Wireless Pair Button Navis Speakers