Operating Instructions; Use Of The Remote Control - Norcent LT2020 User Manual

OPERATING INSTRUCTIONS

USE OF THE REMOTE CONTROL

POWER:
Press to turn on/off the
TV. The TV is never
completely powered off
unless it is physically
unplugged.
0~9/100 Digit buttons
To select a T V channel.
CH
Press ▲ or▼ to brows
through the TV channels
which are not erased. To
view a blocked channel, use
the digit buttons to access
the channel and enter your
access code.
VOL
Press + or – to adjust the
volume.
PC
select your input source
to PC
PIP
Press this button to
display PC input and
other input on the screen
at same time.
MENU
Press repeatedly to
display OSD menu.
V-CHIP
Press this button to setup
parental control.
SWAP
Not Supported. (for the
model with this function
only)
SIZE
Not Supported. (for the
model with this function
only)
POP
Not Supported. (for the
9
model with this function
only)
MUTE
Temporarily interrupt the
sound or restore it.
DISPLAY
Press this button to
Display Channel number
on the right-top corner.
MTS /SAP
press
this key to activate
Multichannel Television
Sound, Stereo or Mono
PRE-CH
To display the previously
selected TV channel.
TV/VIDEO
Select your input source:
press repeatedly to select
TV, AV1, AV2, S-VIDEO or
COMPONENT mode,
according to where you
connected your external
source.
Ÿ AV1/AV2 for a VCR
connected to the AV
connectors of the TV.
Ÿ S-VIDEO for a S-Video
VCR connected to the S-
VIDEO connector of the
TV.
Ÿ
COMPONENT for a
DVD/DTV Set Top Box or
another component video
device connected to Y,
Pb, Pr and to the AV
CAPTION
Press this button to turn
Closed Caption on.
Be sure you have
selected Caption On in
the Setup menu.