Operating Instructions; Use Of The Remote Control - Norcent LT2740 User Manual

OPERATING INSTRUCTIONS

USE OF THE REMOTE CONTROL

POWER:
Press to turn on/off the TV.
The TV is never completely
powered off unless it is
physically unplugged.
CH
Press or to
browse through the
TV channels.
VOL
Press + or – to adjust
the volume.
SIZE
Display the graphic in
16:9 or 4:3 mode.
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. The counter runs
from 30,60,90,120 minutes.
The timer begins to count
down from the number of
minutes selected after the
display has disappeared.
PIP
ON/OFF
Used to switch the PIP
function ON or OFF.
(option).
PIP/POP
Press this button to
display PC input and
other input on the
screen at same time.
(option).
SWAP
Press to swap the two
screens when PIP or
POP is work (option)
MENU, ▲, ▼,
,
These buttons are used to
display or adjust the various
functionalities.When the PIP
is ON but no menus are
available, use these ▲, ▼,
to change the position
,
of the PIP.
V-CHIP
Use this button to define
the movies that this TV set
can receive.
CAPTION
Press this button to turn
Closed Caption on.
7
DISPLAY
Press this button to
Display Channel
number on the right-top
corner.
MUTE
Temporarily interrupt the
sound or restore it.
0~9/100 Digit buttons
To select a TV channel.
PRE-CH
To display the previously
selected TV channel.
TV/VIDEO
Select your input source: press
repeatedly to select TV, AV1,
AV2, S-VIDEO or
COMPONENT mode,
according to where you
connected your external
source.
AV1/AV2 for a VCR
connected to the AV
connectors of the TV.
S-VIDEO for a S-Video
VCR connected to the S-
VIDEO connector of the TV.
Color contrast signal and
HDTV input via Y, Pb, Pr
on the top of the DVD set.
MTS
Press
this key to activate
Multichannel Television
Sound, Stereo or Mono
PIP
TV/VIDEO
Select the signal source:
If you are in main picture
or HDTV mode, you can
select audio1, audio2, S-
video, color contrast or
TV signal. Otherwise, you
can only select computer
graphics or HDTV.