Table of Contents
Advertisement
Mounting Your Tao xm2go on the Dash
We've included three types of mounts to help you
install your Tao xm2go in your vehicle's interior.
FLUSH MOUNT: Attach the adhesive pad to the back of
your Tao xm2go's vehicle cradle. Stick
the vehicle cradle onto a flat surface in
your vehicle, preparing the surface as
described below. Do not install the
mount on a leather surface. Doing so
could permanently damage the surface.
VENT MOUNT: Assemble the vent mount as shown.
Find a horizontal air vent that is
strong enough to hold the weight of
your Tao xm2go and its cradle. Clip
the vent mount into the vent.
SWIVEL MOUNT: Find a suitable location; the mount
uses a strong adhesive and you'll have difficulty
repositioning it after installation.
Do not install this mount on a
leather surface. Doing so could
permanently damage the surface.
Make sure the air temperature is
at least 60°F.
In addition, you wil find a small cell phone mount
adaptor in the package. This adaptor works with
generic cell mounts and allows you to mount your Tao
xm2go to the cell phone mount.
33
Advertisement
Table of Contents
