Table of Contents
Advertisement
Skipping Channels
You can simplify the list of channels that you see when
you rotate the dial. To skip over a channel:
1. Use the "menu" button and dial to select "Channel
Access."
2. Choose the "Channel Skip/Add" option.
3. You will see a list of channels. There is a "+" or a "-
" in front of each channel. To skip a channel,
highlight that channel and press the dial in to
change the "+" to "-." To add a channel, change the
"-" to a "+."
4. When you're done,
press the "menu"
button twice (or do
nothing for 15
seconds) until your
Tao xm2go returns to
normal operation.
TIP: You can still tune to any channel by entering the
channel number or by pressing a preset. Skipping a
channel does not remove it from use.
TIP: This should not be used for "parental control."
To completely block access to any XM channel, contact
XM Listener Care at 1.800.852.XMXM
(1.800.852.9696).
Returning to Factory Defaults
You can return your Tao xm2go to its factory-installed
format. Be careful: This feature erases all settings,
including Stock Ticker, display options, audio options,
channel skip/add, Info Extras, and anything stored in
"My XM."
1. Use the "menu"
button and dial to
select "Set Factory
Defaults."
2. Select "Yes" to restore
your Tao xm2go to the
factory settings.
27
Advertisement
Table of Contents
