Table of Contents
Advertisement
Connecting to a Stereo
Plug the AC adaptor into an outlet. Connect the home
antenna and connect the line out to either your home
stereo or powered (PC type) speakers.
Receiving the XM Signal
Turn your Tao xm2go on by pressing the power
button. You should be able to hear channel 1, the XM
Preview Channel. If you do not, and the screen
displays "NO SIGNAL," try moving your Tao xm2go's
antenna to another location. Make sure the antenna
points south, either outdoors or through a window. If
the "NO SIGNAL" message persists, refer to "Aiming
the home antenna" (page 29). Please read the TIP
below the illustration for optional setup and
activation procedure information.
TIP: Establishing a good signal environment in the
home setup is highly desirable, but this is not the
only way you can receive the XM signal. As an
option, you can refer to "Using Tao xm2go In Your
Vehicle" (page 30) and continue this setup and
activation process with your Tao xm2go installed in
a vehicle.
13
Advertisement
Table of Contents
