Mounting Hardware - B&B Electronics Vlinx VESR4 4 Series User Manual

Section 2 - VESR4x4 Hardware

Mounting Hardware

VESR4x4 Serial Servers can be DIN rail or panel mounted. The necessary
hardware is included in the accessory kit, which also includes the screws for
attaching the mounting hardware. Two brackets are provided for mounting the
serial server flush to a panel or behind a rack-mount instrument panel.
Each bracket is mounted using
additional threaded holes on the side of the serial server allow the unit to be
mounted in six different configurations.
If extra mounting brackets are needed, they can be ordered from B&B
Electronics as Kit Number #9030.
The DIN rail mounting bracket attaches to the back of the serial server using
three 4-40 flat head screws.
Page 16 of 70
Figure 9. Power Connectors
Figure 10. Panel Mount Brackets
two 4-40 flat-head screws (included). The
Figure 11. VESR4x4 showing Panel Mount Bracket options
Vlinx VESR4x4 Serial Server
www.bb-elec.com/
www.bb-europe.com/