Table of Contents
Advertisement
After winding the lead wire around the core,
insert the 7P connector from the SP relay
PWB in the terminal PWB. (Perform the
above by placing the core around the place
shown). Be careful not to touch the screw.
Push the core of the SP lead wires into the
space between the shield case and the
speaker relay PWB. (The direction of the
core can be either vertical or horizontal.)
All manuals and user guides at all-guides.com
After passing through the cores, insert the
terminals in the 4P and 6P housings.
To avoid unnecessary radiation, attach felt to
each lead wire and fix it to the case in order
that the lead wires do not overlap each other
(to prevent the contact of each lead wire).
Avoid.
5P
4P
Figure 11
– 11 –
6P
4P
Core
Mount the core to the 11P lead wire.
5P
4PB 1
SM-SX1/SX1W
3P
3P
2P
2P
Advertisement
Table of Contents
