Table of Contents
Advertisement
Installation
To perform a functional test:
1.
Turn the output gear wheel by hand. Turning it in one direction should lock the wheel. In the other di-
rection the gear wheel should be turned easily. The direction for locking (clockwise or counterclock-
wise) depends on the configuration of the specific GFA module.
2.
If it is hard to turn, open the housing and check that all components are in the correct position.
3.
Grease the system.
6
EN
© Saltus Industrial Technique AB - 9839 1814 01
GFA-OOT
Advertisement
Table of Contents
