Front Of Vehicle - Alpine PSS-24WRA Installation Manual

Sub Woofer/Amp Installation (continued)
7
Remove 10mm nut and attach the negative (-)
ground terminal to the factory ground stud below
the center console.
9
Connect the power cable to the main harness.
11
Connect the T-harness and the radio with either
the Tharness or the RCA adaptors. Refer to page
15 and 16 for the correct system diagram. Return
all removed components to their original location.
PSS-24WRA V20211025
8
Connect the main harness to the amplifier assembly
and align it to the seat mounting holes.
10
Route the main harness along the side of the
center console to the radio location.
Jeep Wrangler
˜ 11/15

Front of Vehicle