Samsung DA68 User Manual page 31

CHANGING THE WATER FILTER
• To reduce the risk of water damage
to your property DO NOT use generic
WARNING
brands of water fi lters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG is not legally responsible for any
damage, including, but not limited to, property
damage caused by water leakage from the use of
a generic water fi lter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filter.
The Filter light turns red to let you
know when it is time to change your
water fi lter cartridge.
To give you time to get a new fi lter,
the red light comes on just before the
capacity of the current fi lter runs out.
Changing the fi lter on time provides
you with the freshest, cleanest water
from your refrigerator.
1. Shut off the water supply.
Pull down the fi lter cover, and then turn the
water fi lter ( 1 ) about 1/4 turn, counter-
clockwise.
2. Pull the water fi lter ( 1 ) from the case fi lter ( 2 ).
DA68-03013E-03.indb 31 DA68-03013E-03.indb 31
• To change the water fi lter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
fi lter because impurities in the water cause it to
stick.
If you are having diffi culties, grip the water fi lter
fi rmly and pull it hard.
• When you pull out the water fi lter, a little water
can leak from the opening. This is normal.
To minimize the water leaks, keep the fi lter
cartridge horizontal when you pull it.
• To prevent overfl ow, empty the water fi lter tray
( 3 ) and dry around the fi lter case ( 2 ).
(Red) (Red)
3. Insert the new fi lter into the fi lter case ( 4 ).
4. Push the fi lter in, and then turn it clockwise until
it locks.
• If you have trouble inserting the water
fi lter because of high water pressure,
(2)
shut off the water supply valve.
(1)
• The locked symbol should be lined up with the
indicator line.
English - 31
(2)
(3)
(4)
2015. 8. 26. 2015. 8. 26. 10:38 10:38