Advertisement
Available languages
Available languages
NOTE: When doing leak testing this appliance, make sure to tighten and
test all loose connections. A slight leak in the system can result in a low
flame, or a hazardous condition that could result in a fire or explosion.
LP Gas Supply Cylinder Disconnection
In order to disconnect the LP tank from the side burner:
1. Turn the burner valves off.
2. Turn the tank valve off. (Turn shut-off clockwise to stop).
3. Detach the regulator assembly from the tank valve by turning the quick
coupling nut counterclockwise.
LP Tank Removal, Transportation and Storage
•
Turn OFF all control knobs and LP tank valve.
Turn coupling nut counterclockwise by hand
only - do not use tools to disconnect. Install
safety cap onto LP tank valve. Always use cap
and strap supplied with valve. Failure to use
safety cap as directed may result in serious
personal injury and/or property damage. Place
dust cap on cylinder valve outlet whenever
the cylinder is not in use. Only install the type
of dust cap on the cylinder valve outlet that is provided with the cylinder
valve. Other types of caps or plugs may result in leakage of propane.
•
Never leave a LP tank inside a motor vehicle. (Heating of the vehicle could
cause an increase in the gas pressure which may open the valve allowing
gas to escape resulting a serious risk of fire or explosion.)
•
Do not store an LP tank in enclosed spaces such as a carport, garage,
porch, covered patio or other building.
•
Do not store LP tank in an area where children play.
LP Tank Exchange
•
- Exchange your Type 1 cylinder for OPD safety feature-equipped replace-
ment tank ONLY.
•
- Always keep new and exchanged LP tanks in upright position during
use, transit or storage. Leak test new and exchanged LP tanks BEFORE
connecting to side burner. Never connect the side burner to an unregulat-
ed gas supply.
LP Tank
Valve
Retainer
Strap
Safety
Cap
Advertisement
