Table of Contents
Advertisement
8.75 in
9.5 mm
.37 in
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning of refrigerator:
•
All four corners of the cabinet must
rest firmly on the floor.
•
The front should be slightly elevated
to ensure that doors close and
seal properly.
•
Doors should align with each other
and be level.
Most of these conditions can be met by
raising or lowering the adjustable anti-tip legs.
To level the cabinet using the anti-tip legs:
1.
Slightly open freezer drawer.
2. Lower anti-tip legs until they are
both touching the floor. Use a pair of
pliers to adjust.
To raise unit: turn leg clockwise
(as shown).
To lower unit: turn leg counterclockwise.
12.25 in
36.75 in
933.4 mm
9.5 mm
.37 in
Anti-Tip
Legs
INSTALLATION
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides and that cabinet is stable.
Door
Door
To make final door height adjustments:
1.
Open Custom-Flex™ Temp drawer to
make the lower hinge visible.
2. Insert 6 mm Allen
shaft of the lower hinge.
To lower door: turn the adjustment
screw clockwise.
To raise door: turn the adjustment
screw counterclockwise
(as shown below).
Flipper Mullion
Adjust the flipper mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded
and perpendicular to the fresh food
door. If the mullion guide is not in the
correct position, it could prevent the door
from closing
completely.
9
Door
Door
wrench into the
TM
Raise
Hide quick links:
Advertisement
Table of Contents
