Remote Control - LG 49VL5B Owner's Manual

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
CAUTION
• Do not mix old and new batteries, as this may
damage the remote control.
• Be sure to point the remote control toward the
remote control sensor on the monitor.
I I
ID
(POWER)
Turns the monitor on or off.
Turns the monitor on.
Turns the monitor off.
Adjusts the brightness of the picture to reduce energy
consumption.
Selects the input mode.
Used for viewing 3D videos. (This model does not support this.)
Toggles between numerical and alphabetical.
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
Deletes the entered numerical or alphabetical character.
Volume Up/Down Button
Adjusts the volume. (This model does not
support this.)
Selects the Aspect Ratio mode.
Automatically adjusts picture position and minimizes image
instability (available for RGB input only).
Mutes all sounds. (This model does not support this.)
Adjust the brightness by pressing the Up and Down buttons on the
remote control. In USB mode, the OSD menu has the Page function
to move to the next file list.
13
and terminals to the