Troubleshooting; Specifications - Panasonic nanoe EH-NA46 Operating Instructions Manual

Troubleshooting

Problem
It switches frequently to cold air
while using in "Hot" mode, or sparks
can be seen within the body.
(These sparks are caused by the
thermostat switch which is the
protective device, and are not
dangerous.)
The hot air is abnormally hot.
The plug is abnormally hot.
Sparks are generated inside the
nanoe™ outlet.
The nanoe™ outlet emits a noise
(crackling noise).
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorised by
Panasonic for repair.

Specifications

Power source
220 V
Power
consumption
Accessories
This product is intended for household use only.
Possible cause
Lint has accumulated on the air inlet or air
outlet.
Hair or something is blocking the air inlet.
The connection to the household outlet is
loose.
Abnormality caused by a dirty electrode
(needle portion).
50-60 Hz 230 V
1 350 W
Quick-dry nozzle, set nozzle
50-60 Hz 240 V
1 500 W
Action
Remove accumulated lint.
(See page 10-11)
Do not block the air inlet.
Use a household outlet that fits
securely.
Perform maintenance of the
nanoe™ outlet. (See page 11)
50-60 Hz
1 600 W
13