Adjusting Focus Manually; Manual Focus - Canon ZR25 MC Instruction Manual

Adjusting Focus Manually

The camcorder can focus automatically. All you have to do is point it, and whatever
is in the center of the display will usually be in sharp focus. If it does not seem to be
E
focusing well, it may be because the subject is not suitable for autofocus.
You can use the manual focusing function for more control over focusing.
Focus lock
+
TAPE CAMERA
Press the FOCUS button to turn off
autofocus. The focus remains locked at
the point set by autofocus.
(eM.FOCUS appears in the display.)
You can now adjust the focus manually
with the selector dial. Press the FOCUS
button again when you want to return
to autofocus.
• If you zoom in on your subject after
turning off autofocus, it may not stay
in focus. It is generally best to adjust
the zoom first, and then the focus.

Manual focus

+
TAPE CAMERA
Use the selector dial to set the focus.
• Turn the selector dial downward to
move the focus farther away.
• Turn the selector dial upwards to
bring the focus nearer.
Notes:
• You cannot adjust the focus without the e mark before M.FOCUS in the
display. Push the FOCUS button so that e appears before M.FOCUS. Then you
can adjust the focus manually.
• The manual focus setting is canceled if you select the
program.
• When you are using the
turned off.
• See "Troubleshooting" on p. 124 for a list of subjects which may not be suitable
for autofocus.
70
,
+
CARD CAMERA
,
+
CARD CAMERA
(Easy Recording) program, autofocus cannot be
REC REC
FOCUS
SEARCH SEARCH
REC REC
FOCUS AE SHIFT
SEARCH SEARCH
(Easy Recording)
AE SHIFT