AEG PROTECT RCS Operation Manual page 17

5 minutes inactivity
Default menu
see § 6.1
Left key menu
Monitoring
see § 6.5
Hit any key
Middle key menu
Main menu Configure
see § 6.7
see § 6.2
Right key menu
Command
see § 6.6
Note: According to your equipment configuration, some menus may be inactivated.
- Menu overview -
Measurements
Output voltage, battery current, load voltage, AC voltage, battery temperature, ambient
temperature, battery charge, charger timer, date and time
see § 6.5.1
Alarm list
Alarm text, "RESET" alarm
see § 6.5.2
History list
Events and alarms text with date, time, and set point
see § 6.5.3
Set language
English or your local language
see § 6.7.1
Set date and time
Enter hour, minutes, month, day and year
see § 6.7.2
"Supervisor"
password
Setup
"User"
see § 6.7.3
password
"Factory"
protected level
Set high rate
Password *
/floating
(if activated)
see § 6.6.1
Available only in charger mode
Set commissioning
Password *
/floating
(if activated)
see § 6.6.2
Manual adjustment
Available only in power supply mode
see § 0
Password *
Battery test
(if activated
see § 6.6.5
Clear history
Password *
see § 6.6.6
Reset AH meter
Password *
see § 6.6.7
Adjust contrast
see § 0
System setup Nominal settings, highrate options,
battery selection, password setting...
Calibrate setup
Calibrate voltage, temperature,
ground fault...
Low/high voltage, current,
Alarm setup
spare inputs...
Activate high rate or floating charge
Activate commissioning or floating charge
Voltage and current power supply adjustment
Activate or deactivate battery test
)
Clear history entries
Reset at 100% battery charge level
+/- LCD contrast adjust
Access usually granted with "Supervisor" password
only (access rights are factory configurable)
Access granted with "Supervisor"
password only (access rights are not
configurable)
Access usually granted with "User" (partly)
and "Supervisor" passwords (access rights
are factory configurable)
* "User" or "supervisor" password